Advantech DLT-V73 Series User Manual page 114

Activating the GNSS data output (NMEA-Data)
Depending on the current module configuration, it may be necessary to activate the
GNSS data output manually via AT command.
Perform the following steps:
1. Open the AT-Port via Putty. (Port number can be different!)
2. In the window paste the command AT+QGPSCFG="autogps",1 from the
clipboard and confirm with Return. Since the characters are not displayed
during manual input it is advisable to copy the prefabricated text to the
clipboard (Strg&C) beforehand and paste it within the Putty window with
a right click (Strg&V) followed by the Return key.
3. If the response ist OK, the command was successful.
DLT-V73 Series User Manual V1.00
WWAN Configuration
114 / 172