Connecting The Keyboard And Mouse; Switching On The Power; Figure 2-6: Connecting The Keyboard And Mouse - Advantech PPC-123 User Manual

2.3.3 Connecting the keyboard and mouse

1. Connect the Y-shaped adapter to the PS/2 mouse and keyboard
port on the I/O section of the panel PC. (See Fig. 2-6.)
2. Connect the PS/2 mouse and keyboard to the Y-shaped adapter.
(See Fig. 2-6.)
If you use a serial mouse and your panel PC has a touchscreen, you
can connect the mouse to any COM port except COM4.
PS/2 mouse
Keyboard

Figure 2-6: Connecting the keyboard and mouse

2.3.4 Switching on the power

Switch on the power switch on the rear cover. (See Fig. 2-4.)
Y-shaped
adapter
PS/2 mouse
and keyboard
Chapter 2 System Setup
port
1 9