Fig. 7.3: Rj45 Network Ports - Advantech DLT-V73 Series User Manual

Connectors
COM1 as a voltage source
The COM1 interface can optionally supply to externally connected equipment with +5/12
VDC. The voltages are protected by internal fuses and may not exceed a continuous
consumed current of 1 A at 5/12 V. Depending on the connected devices.
The maximum current consumption may be significantly lower.
With using "MDevice" you can select whether "+5/12 VDC" or "RI" is output on pin 9 of
COM1.
Network adapter (10/100/1000/2500)
The DLT-V73 is equipped with two network adapter with 10/100/1000/(2500) Mbit per
second. This adapter can be accessed via the bottom of the device and offers an RJ45
connection jack. The RJ45 connection port has two integrated status LEDs and are
assigned as follows:

Fig. 7.3: RJ45 network ports

DLT-V73 Series User Manual V1.00 57 / 172