Operating The Touchscreen; Multi-Touch Capability - Advantech DLT-V73 Series User Manual

8.3.

Operating the touchscreen

All touchscreens (Resistive and PCAP) can be operated with:
Clean, dry fingers

Clean, dry gloves

Resistive touchscreens can be operated with:
Suitable touch stylus plastic or wood, rounded tip

PCAP touchscreens can be operated with:
Suitable touch stylus with capacitive (electrically conductive) tip

Prevent damage to all touchscreens Resistive and PCAP
1. Keep the touchscreen clean.
2. Do not touch the touchscreen with pointed, sharp, rough or hard objects,
3. Make sure that no adhesives get on the surface of the touchscreen.
4. Ensure that the screen surface is not influenced by high voltages or static
5. Do not use excessive force when touching touchscreens, do not hit or
6. If the device with the touchscreen is placed down: Place a clean, soft cloth
NOTICE
8.3.1.

Multi-touch capability

Depending on the installed operating system, the PCAP touchscreen of the DLT-V73 is
multi-touch capable. This means it detects simultaneously up to ten fingers in non-glove
mode / two fingers in glove-mode / and one finger in thick-glove mode.
DLT-V73 Series User Manual V1.00
e.g. ball point pens, writing implements, tools of any kind (e.g.
screwdrivers).
electricity.
press hard.
underneath.
Prevent system malfunction and property damage
Salt water on the PCAP touchscreen can be interpreted as a "touch"
and lead to malfunctions.
Operating the DLT-V73
68 / 172