Page 2
The documentation and the software included with this product are copyrighted 2013 by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right to make improvements in the products described in this manual at any time without notice.
Product Warranty (18 months) Advantech warrants to you, the original purchaser, that each of its products will be free from defects in materials and workmanship for two years from the date of purchase. This warranty does not apply to any products which have been repaired or altered by persons other than repair personnel authorized by Advantech, or which have been subject to misuse, abuse, accident or improper installation.
Technical Support and Assistance Visit the Advantech website at www.advantech.com/support where you can find the latest information about the product. Contact your distributor, sales representative, or Advantech's customer service center for technical support if you need additional assistance. Please have the following information...
DISCARD USED BATTERIES ACCORDING TO THE MANUFACTURER'S INSTRUCTIONS. The sound pressure level at the operator's position according to IEC 704-1:1982 is no more than 70 dB (A). RESTRICTED ACCESS AREA: The equipment should only be installed in a Restricted Access Area. DISCLAIMER: This set of instructions is given according to IEC 704‐1. Advantech disclaims all responsibility for the accuracy of any statements contained herein. 5 ...
Packing List Before installation, please ensure the following items have been shipped: 1 x DS-561 Unit 1 x English User Manual 1x Accessory box Chapter 1 General Introduction This chapter gives background information on DS-561 series. 1.1 Introduction The DS‐561 is powered by 3 generation Intel Core i7 processor‐based platform with Dsub 15pin VGA x 1 and Display Port x 1. DS‐561 media player is the only one ultra slim device (166x 177x 19mm) in the worldwide and build Windows 8 Professional of OS Image that enables digital signage manufacturers to deploy systems faster and development and implementation. The player‐screen communication interface supports digital audio/video signals via display port, for picture‐perfect content reproduction. DS‐561 also supports 1x Giga LAN, 1x COM ports, 2x USB3.0 and 2x USB2.0 ...
Page 7
1 x VGA 1 x Display Port 2 x USB 3.0 compliant ports 2 x USB 2.0 compliant ports 1 audio phone jack for Line-out 1 x COM (RS-232) 1 x MiniPCIe (Internal) Ethernet Chipset: 1 x Intel 82579LM Speed: 100/1000 Mbps Interface: 1 x RJ-45 jacks with LED Standard: MACSec (802.1AE), 9k Jumbo Frames, and 2 Tx/Rx queues/ 802.3az (EEE - Energy Efficient Ethernet)
Page 9
Figure. 4 ANGLE_CB Figure. 5 ANGLE_CT **Warning! Use suitable mounting apparatus to avoid risk of injury. 9 ...
Page 10
1.5.2. Installatiion with brackets Figure. 6 System with Brackets (top view) Figure. 7 System with brackets (bottom view) **Note! This pair of wallmount bracket is designed for side of chassis and bottom side. Reverse installation is not permitted. 10 ...
1.5.3. Direction of Systems with bracket (1) Direction method 1: Upright (2) Direction method 2: Flatways 1.6 Power Requirements 1.6.1 System Power 19V DC‐in Model name Output rated Tma (degree C) FSP065‐RAB 19VDC, 3.42A 40 (+‐5%) FSP090‐DMBB1 19VDC, 4.74A 40 (+‐5%) SPU63‐105 19VDC, 3.31A 40 (+‐5%) ADP_65JH ABCD 19VDC, 3.42A 40 (+‐5%) **CAUTION: Provided with each unit. "This product is intended to be supplied by an UL certified power 11 ...
supply, output rated 19Vdc, 3.31A minimum, Tma=40 degree C." or equivalent statement provided in operating manual, if power unit is not provided. 1.6.2 RTC Battery Panasonic 3V/200mAH BR2032L **CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS 1.7 Environmental Specifications 1.7.1 Operating Temperature 0° C ‐ 40° C (32~122° F) 1.7.2 Relative Humidity 95% @ 40° C (non‐condensing) 1.7.3 Storage Temperature 40; 60 ℃ (‐4~140° F) 1.7.4 Vibration Loading During Operation 5‐500Hz, PSD 0.0005G²/Hz , 0.5 Grms, 3 axes, 1 hr/per axis 1.7.5 Safety UL, TUV, CB, C‐Tick, RCM, BSMI, CE LVD, NOM, EAC, S Mark, BSMI, CCC 1.7.6 EMC CE, FCC Class B, VCCI, BSMI, C‐Tick 1.7.7 RF FCC, R&TTE, TELEC, NCC, FCC ID, A‐Tick 12 ...
Chapter 2 Hardware Installation This chapter introduces external I/O and the installation of DS‐561 Hardware. 2.1 DS‐561 I/O Connectors 2.1.1 Front I/O 2.1.2 Rear I/O 2.2 DS‐561 External I/O Connectors 2.2.1 Power ON/OFF Button DS‐561 has a power ON/OFF button on the front side. Push this button to turn the system ON and OFF. It also supports a 5 second delay soft power off. Figure. 8 Power ON/OFF Button 2.2.2 COM Connector DS‐561 provides one D‐sub 9‐pin connectors serial communication interface port. The ports support RS‐232 mode communications. Table. 1 COM Connector Pin Assignments Signal Name Figure. 9 COM Connector 13 ...
Page 14
2.2.3 USB 1~4 Connectors DS‐561 provides four USB interface connectors, which gives complete Plug & Play and hot swapping capability for up to 127 external devices. The USB interface is compliant with USB UHCI, Rev. 3.0. and Rev. 2.0. The USB interface supports Plug and Play, which enables you to connect or disconnect a device without turning off the system. Table. 2 USB 1~4 Port Pin Assignments Signal Name USB Data- USB Data+ Figure. 10 USB 1~4 Connectors 2.2.4 Ethernet Connector (LAN) DS‐561 provides one RJ‐45 LAN interface connector, fully compliant with IEEE802.3u 10/100/1000 Base‐T CSMA/CD standards. The Ethernet port provides a standard RJ‐45 jack connector with LED indicators to show its Active/Link status and speed status. Table. 3 LAN Connector Pin Assignments Signal Name MDI0+ MDI0- MDI1+ MDI1- Figure. 11 Ethernet Connector MDI2+ MDI2- MDI3+ MDI3- +V3.3 & Link1000# ...
Page 15
**CAUTION: EXCEPT POWER SWITCH FUNCTION, CAN CAUSE ANY DEVICE BURED UP, FIRE, AND DANGEROUS RESULTS. 2.2.7 DisplayPort DS‐561 not only uses DP to achieve higher resolutions by low pin but also allows data packets to be extensible, meaning additional features can be added over time without significant changes to the physical interface itself. DisplayPort can be used to transmit audio and video simultaneously, but each one is optional and can be transmitted without the other. Table. 4 DisplayPort Pin out Signal Name 1 ML_Lane 0 (p) 2 GND 3 ML_Lane 0 (n) Figure. 13 External connector (source‐side) on PCB 4 ML_Lane 1 (p) 5 GND 6 ML_Land 1 (n) 7 ML_Lane 2 (p) 8 GND 9 ML_Lane 2 (n) ML_Lane 3 (p) GND ML_Lane 3 (n) CONFIG1 ...
Page 16
2.3 Hardware Installation 2.3.1 HDD Installation (1) To assembly a HDD module, secure HDD to HDD bracket with 2 screws. (2) Install a HDD module into DS‐561, then secure it with a screw. SATA connector Screw 1 HDD bracket Screw 2 Figure. 14 HDD Installation Top cover HDD Module FAN Module Installed direction Bottom cover Figure. 15 System Installation 16 ...
Page 17
2.3.2 Memory Installation (1) Be easy to install/ remove memory on bottom cover. (2) Remove memory cover and replace memory inside. (3) Install the memory cover, then secure with screw. Screw Memory cover Figure. 16 Memory Installation 2.3.3 WiFi Module Installation (1) Be easy to remove/ install on bottom cover like memory installation. (2) Remove WiFi module cover first and replace WiFi module inside. (3) Install the WiFi module cover, then secure with screw. Screw WiFi module cover Screw Screw Figure. 18 WiFi module installation Figure. 17 System with WiFi module Installation 17 ...
Chapter 3 BIOS Settings This chapter introduces how to set BIOS configuration data. 3.1 BIOS Introduction AMIBIOS has been integrated into many motherboards for over two decades. With the AMIBIOS Setup program, you can modify BIOS settings and control various system features. This chapter describes the basic navigation of the DS‐561 series BIOS setup screens. AMIBIOS’s ROM has a built‐in setup program that allows users to modify the basic system configuration. This information is stored in battery‐backed CMOS so it retains the setup information when the power is turned off. 3.2 Main Setup When you first enter the BIOS Setup Utility, you will enter the Main setup screen. You can always return to the Main setup screen by selecting the Main tab. The Main BIOS setup screen has two main frames. The left frame displays all the options that can be configured. Options in blue can be configured, and grayed‐out options cannot be configured instead. The right frame displays the key legend. The key legend in the top is an area reserved for a text message. When an option is selected in the left frame, it is highlighted in white. Often a text message will accompany it. 3.2.1 System Time/ System Date Use this option to change the system time and date. Highlight System Time or System Date using the <Arrow> keys. Enter new values through the keyboard. Press the <Tab> key or the <Arrow> keys to move between fields. The date must be entered in MM/DD/YY format. The time must be entered in HH:MM:SS format. Figure. 19 Main Setup Screen 18 ...
Page 19
3.2.2 Advanced BIOS Features Setup Select the Advanced tab from the DS‐561 setup screen to enter the Advanced BIOS Setup screen. You can select any of the items in the left frame of the screen, such as CPU configuration, to go to the sub menu for that item. You can display an Advanced BIOS Setup option by highlighting it using the <Arrow> keys. All Advanced BIOS Setup options are described in this section. The Advanced BIOS Setup screens are shown below. The sub menus are described on the following pages. Figure. 20 Advanced BIOS Features Setup Screen This section allows you to control hardware monitoring and power ACPI Settings: management CPU Configuration: Hyper‐threading: Enabled for Windows XP and Linux (OS optimized for Hyper‐Threading Technology) and Disabled for other OS (OS not optimized for Hyper‐Threading Technology). When disabled, only one thread per enabled‐core is enabled. Active Processor Cores: Number of cores to be enabled in each processor package. Limit CPUID Maximum: Disabled for Windows XP. Execute Disable Bit: It can prevent certain classes of malicious buffer overflow attacks when combined with a supporting OS (Windows Server 2003 Sp1, Windows XP SP2, SuSE Linux 9.2 RedHat Enterprise 3 Update 3.). Intel Virtualization Technology: When enabled, a VMM can utilize the additional hardware capabilities provided by Vander pool Technology. Hardware Prefetcher: To turn on/off the Mid Level Cache (L2) streamer prefetcher. Adjacent Cache Line Prefetch: To turn on/off prefetching of adjacent cache lines 19 ...
Page 20
Figure. 21 CPU Setting page SATA Configuration: This section allows you to set up SATA devices configuration. SATA Controller(s): Enable or disable SATA Device. SATA Mode Selection: Determines how SATA controller(s) operate. The choice: IDE, AHCI, RAID Figure. 22 SATA Setting page Configuration Management Engine Technology Parameters. PCH-FW Configuration: 20 ...
Page 21
Configuration: Configuration Active Management Technology parameters. Intel AMT: Enable/Disable Intel(R) Active Management Technology BIOS Extension. Note: iAMT H/W is always enabled. This option just controls the BIOS extension. If enabled, this requires additional firmware in the SPI device. BIOS Hotkey Pressed: OEMFLag Bit 1: Enable/Disable BIOS hotkey press. MEBx Selection Screen: OEMFLag Bit 2: Enable/Disable MEBx selection screen. Hide Un‐Configure ME Confirmation: OEMFLag Bit 6: Hide Un‐Configure ME without password Confirmation Prompt. MEBx Debug Message Output: OEMFLag Bit 14: Enable MEBx debug message Output. Un‐Configure ME: OEMFLag Bit 15: Un‐Configure ME without password. Amt Wait Timer: Set timer to wait before sending ASF_GET_BOOT_OPTIONS. ASF: Enable/Disable Alert Specification Format Activate Remote Assistance Process: Trigger CIRA boot. USB Configure: Enable/Disable USB Configure function. PET Progress: User can Enable/Disable PET Events progress to receive PET events or not. WatchDog: Enable/Disable WatchDog Timer. Figure. 23 AMT Configuration setting 21 ...
Page 22
USB Configuration Parameters. USB Configuration: Legacy USB Support: Enable Legacy USB support. AUTO option disables legacy support if no USB devices are connected. DISABLE option will keep USB devices available only for EFI applications EHCI Hand‐off: This is a workaround for 0Ses without EHCI hand‐off support. The EHCI ownership change should be claimed by EHCI driver. USB transfer time‐out: The time‐out value for Control, Bulk, and Interrupt transfers. The choice: 1 sec, 5 sec, 10 sec, 20 sec Device reset time‐out: USB mass storage device Start Unit Command time‐out. The choice: 10 sec, 20 sec, 30 sec, 40 sec Device power‐up delay: USB mass storage device Start Unit Command time‐out. Figure. 24 USB Configuration setting 22 ...
Page 23
Set Parameters of Serial port 0 (COM) Serial Port 0 Configuration: Figure. 25 Serial Port 0 Configuration setting CPU PPM Configuration Parameters CPU PPM Configuration: EIST: Enable/Disable Intel SpeedStep Turbo Mode: Turbo Mode CPU C3 Report: Enable/Disable CPU C3(ACPI C2) report to OS Figure. 26 CPU PPM Configuration setting 23 ...
Page 24
3.2.3 Chipset BIOS Feature Setup Select the Chipset tab from the DS‐561 setup screen to enter the Chipset BIOS Setup screen. Users can select any item in the left frame of the screen, such as PCH‐IO Configuration and System Agent Configuration. 3.2.4 Security BIOS Feature Setup Select the BOOT tab from the setup screen to enter the Security BIOS Setup screen. Administrator Password: Set up Administrator Password. When set, limits access to BIOS Setup. User Password: Set User Password. When set, limits machine boot and access to BIOS Setup. Figure. 27 Security BIOS 3.2.5 Save & Exit BIOS Feature Setup Select the BOOT tab from the setup screen to enter the save BIOS Setup screen. Save Changes and Exit: Exit system setup after saving the changes. Discard Changes and Exit: Exit system setup without saving any changes. Save Changes and Reset: Reset the system after saving the changes. Discard Changes and Reset: Reset system setup without saving any changes. 24 ...
Page 25
Save Changes: Save Changes done so far to any of the setup options. Discard Changes: Discard Changes done so far to any of the setup options. Restore Defaults: Restore/Load Defaults values for all the setup options. Save as User Defaults: Save the changes done so far as User Defaults. Restore User Defaults: Restore the User Defaults to all the setup options. Figure. 28 Save & Exit BIOS Feature Setup Figure. 29 warning message about system protection 25 ...