Installation Procedures; Connecting The Power Cord; Connecting The Keyboard Or Mouse; Switching On The Power - Advantech PPC-L156T User Manual

Battery
Cover

2.2 Installation Procedures

2.2.1 Connecting the power cord

The panel PC can only be powered by a DC electrical outlet. Be sure to
always handle the power cords by holding the plug ends only. Please fol-
low Figure 2-5 to plug the power cord into the DC inlet of the panel PC.
Use an M3 screw to fix the power clamp. You can find the power cord,
adapter, and power clamp in the accessory box.

2.2.2 Connecting the keyboard or mouse

Before you start the computer, please connect the Y-shaped adaptor to the
PS/2 mouse and keyboard port on the I/O section of the panel PC, then
connect the necessary mouse or keyboard to the Y-shaped adapter or USB
ports.

2.2.3 Switching on the power

When you look at the rear side of the panel PC, you will see the power
switch as shown in Figure 2-2.
PPC-L156T User Manual
Figure 2.4: Rear view of the panel PC
12
HDD & CF
Card Cover
PCI Expansion
Slot Cover
Product Label