Head Check - Toshiba B-EX Series Key Operation Specification

8.3.3 HEAD CHECK

The print head check procedure is the same as that for the maintenance counter data described in 8.3.1
MAINTENANCE CONT.
The following table shows the menu structure from the top menu of the system mode to HEAD CHECK.
MENU ITEM
SYSTEM MODE
<1>DIAG.
HEAD CHECK
While checking
"CHECKING" displayed
Normal end
"NORMAL END" displayed
When broken dots are detected
The ONLINE LED is turned off and the ERROR LED is
turned on.
The number of broken dots is displayed in the
corresponding format out of the total number of dots.
The total number of dots is right-aligned.
Display pattern and key operation
7.1 LIST BOX WITH SCROLLBAR
7.3 INFORMATION DISPLAY
77