Toshiba B-EX Series Key Operation Specification page 57

Menu operation example
Display Procedure
Turn on the printer while holding down the [FEED] and [PAUSE]
keys simultaneously.
The SYSTEM MODE screen is displayed.
Select <1>DIAG. and press the [ENTER] key.
The submenus of [<1>DIAG.] are displayed.
Select [MAINTENANCE CONT] and press the [ENTER] key.
The submenus of [MAINTENANCE CONT] are displayed.
Select [PRINT TYPE] and press the [ENTER] key.
The [PRINT TYPE] menu is displayed.
Select the print method.
When the [ENTER] key is pressed, the screen returns to the
[MAINTENANCE CONT] menu.
Press the [DOWN] key to select [CUT TYPE], and press the
[ENTER] key.
The [CUT TYPE] menu is displayed.
Select [OFF] or [ON].
When the [ENTER] key is pressed, the screen returns to the
[MAINTENANCE CONT] menu.
Press the [DOWN] key to select [CHECKING & PRINT], and press
the [ENTER] key.
The maintenance counter data and self-diagnosis result are printed.
While printing ...
"PRINTING" is displayed.
When the printing normally ends:
The screen returns to the [MAINTENANCE CONT] menu.
When a print error occurs:
The printer displays the error message, and then stops.
The ERROR LED turns on and the ONLINE LED turns off.
When the [ENTER] or [CANCEL] key is pressed, the screen returns
to the [MAINTENANCE CONT] menu. The ERROR LED turns off
and the ONLINE LED turns on.
Note that the printer does not reprint the label automatically after
recovery from the error.
52