Head Check - Toshiba B-EX6T Series Key Operation Specification

9.4.3 HEAD CHECK

The print head check procedure is the same as that for the maintenance counter data described in 9.4.1
MAINTENANCE COUNTER.
The following table shows the menu structure from the top menu of the system mode to HEAD CHECK.
The menu structure of HEAD CHECK
Menu item
<1>DIAGNOSTIC
HEAD CHECK
Types of message during head check
While checking
Normal end
When broken dots are detected
At this time, the ONLINE LED turns off and the
ERROR LED turns on.
HEAD CHECK
CHECKING
HEAD CHECK
NORMAL END
HEAD CHECK
HEAD ERROR
16 /832 dots
77