Rbn Adj.<Fw - Toshiba B-EX Series Key Operation Specification

8.5.7 RBN ADJ.<FW>
The reference section depends on the model.
Reference
8.5.7.1 RBN ADJ.<FW>
8.5.7.2 RBN ADJ.<FW>
8.5.7.2.1 TYPE1
8.5.7.2.2 TYPE2
Note: This parameter is not used for B-EX4D2-G.
8.5.7.1 RBN ADJ.<FW>
Max. Min. value
value
10 -15
The fine adjustment value is not effective for the reverse rotation.
The fine adjustment value for the ribbon take-up motor is limited depending on the print speed.
Note: Since B-EX4D2 is a direct thermal printer, this parameter is displayed but not used for actual
printing.
Print speed
Fine adjustment value
*1: For the B-EX4T1-TS25-R V2.0 or later, each time the fine adjustment value is changed by one, the
factor changes by 3%, in the case the factor of fine adjustment value "0" is 100%.
Fine adjustment value
+10
+9
+8
+7
+6
+5
+4
+3
+2
+1
0
-1
-2
8.5.7.2 RBN ADJ.<FW>
8.5.7.2.1 TYPE1
Max. Min. value
value
10 -15
The fine adjustment value is not effective for the reverse rotation.
The fine adjustment value for the ribbon take-up motor is limited depending on the print speed.
Print speed
Fine adjustment value
Step Display
1 Decimal
6 ips or slower
-15 to +10 -15 to +5
B-EX4T1-TS25-R V2.0 or later
Factor *1 Fine adjustment value
130%
127%
124%
121%
118%
115%
112%
109%
106%
103%
100%
97%
94%
Step Display
1 Decimal
6 ips or slower
-15 to +10 -15 to +5
106
Applicable model
Other than below
B-EX4T1-G/T-QM/CN C1.2 or later
B-EX4T2-G/T-QM/CN C1.2 or later
B-EX4T2-H-QM/CN C1.1A or later
B-EX4D2-G-QM/CN D1.1 or later
Sign Integer Decimal
digit
Exist 2
8 ips 10 ips or faster
-15 to 0
-3
-4
-5
-6
-7
-8
-9
-10
-11
-12
-13
-14
-15
Sign Integer Decimal
digit
Exist 2
8 ips 10 ips or faster
-15 to 0
0-padding
place measure
0 None
Factor *1
91%
88%
85%
82%
79%
76%
73%
70%
67%
64%
61%
58%
55%
0-padding
place measure
0 None
Unit of
Step
Unit of
Step