Value Setting Display - Toshiba B-EX Series Key Operation Specification

7.2 VALUE SETTING DISPLAY

The value setting screen is used for setting a value by increasing or decreasing it.
It is comprised of the following.
Display example
Setting range
The currently programmable item is highlighted.
The display of the symbols like "+" and "-", and the unit of measure like "mm" and "step" differs depending
on the item to be set.
Setting screen with one field
Setting screen with multiple fields (placed
horizontally)
Setting screen with multiple fields (placed
vertically)
Key function (setting screen with one field)
Key Substitute key
[MODE] None
[CANCEL] [FEED] + [RESTART]
[ENTER] [PAUSE]
[UP] [RESTART]
[DOWN] [FEED]
[LEFT] None
[RIGHT] None
Display
Function
Returns to the top menu without saving changes.
Returns to the upper-level menu without saving changes.
Saves the changes and returns to the upper-level menu.
Increases the setting value by specified step. When the setting
value reaches the maximum, it does not increase any further.
Decreases the setting value by specified step. When the
setting value reaches the minimum, it does not decrease any
further.
No function
No function
41
Title
Setting value