Table of Contents
Advertisement
3. MAINTENANCE
3.1 Cleaning
3.1.1 Print Head
CAUTION!
1. Do not allow any hard
objects to touch the print
head or platen, as this may
cause damage to them.
2. Do not use any volatile
solvents including thinner
and benzene, as this may
cause discoloration of the
cover, print failure, or
breakdown of the printer.
3. Do not touch the print head
element with bare hands,
as static may damage the
print head.
ATTENTION!
1. Ne laissez aucun objet dur
entrer en contact avec la
tête d'impression ou le
rouleau,car cela peut les
endommager.
2. N'utilisez aucun solvant
volatile, diluant ou
benzène,car cela peut
entraîner une décoloration
du capot, des problèmes
d'impression,voire une
panne de l'imprimante.
3. Ne touchez pas la tête à
mains nues, l'électricité
statique peut endommager
la tête. Éléments
chauffants de la tête (sur
l'arête de la tête)
NOTE:
Please purchase the Print Head
Cleaner from the authorised
TOSHIBA TEC service
representative.
To maintain the printer performance and print quality, please clean the
printer regularly, or whenever the media is replaced.
When use Linerless cutter module, cleaning is required to keep printer
and cutter life after 1 roll is printed or the end of day.
1. Turn the power off.
2. Open the Top Cover.
3. Clean the Print Head Element 1 time per day with a Cleaner Pen.
E3- 2
ENGLISH VERSION EO1-33095
3.1 Cleaning
Print Head Element
(Positioned at the
print head edge)
Advertisement
Table of Contents
