System Mode; Outline Of The System Mode - Toshiba B-EX Series Key Operation Specification

8 SYSTEM MODE

8.1 OUTLINE OF THE SYSTEM MODE

The printer enters the system mode by being turned on using either of the following operations.
Holding down the [FEED] and [PAUSE] keys simultaneously.
・
Holding down the [MODE] key.
・
The system mode is intended for performing self-testing and various parameter settings.
When the top menu is displayed, the firmware version is shown on the right side of the title.
The language displayed on the panel is Japanese when "Japanese" is selected for the LCD language
parameter, and English when "English", "German", "French", "Dutch", "Spanish", "Italian", "Portuguese" or
"Chinese" is selected.
The key operations for the system mode are described below.
The key operations follow Section 7.1 LIST BOX WITH SCROLLBAR.
Display
Top menu list
<1>DIAG.
<2>PARAMETER SET
<3>ADJUST SET
<4>TEST PRINT
<5>SENSOR ADJUST
<6>RAM CLEAR
<7>INTERFACE
<8>BASIC
<9>FOR FACTORY
<10>RFID
<11>RTC
<12>EMULATION MODE
<13>USB MEMORY
<14>RESET
49