Ethernet Settings - Grandstream Networks GHP6 Series Administration Manual

Time based: Set the time range and number to be forwarded the calls to. In this time range, calls are forwarded to the
number specified in "In Time Forward To"; out of this time range, calls are forwarded to the number specified in "Out
Time Forward To".
Others: Configure Call forward when the phone is Busy or on DND or based on No Answer Out.
Auto-Answer
IF Enabled and set to "Always", the phone will automatically turn on the speaker phone to answer all incoming calls.
If enabled and set to "Enable Intercom/Paging", the phone will answer the call based on the SIP info header sent from the
server/proxy.
By default, it's turned off.
Harassment interception
Blacklist: This menu allows configuring a blacklist of number that will be blocked from calling the phone, users can either
enter the numbers to block manually, from contacts or from call history
Intercept anonymous calls: when enabled the phone rejects all the anonymous calls, users can choose on which account
this setting is to be applied
Account Ringtones
Select a ringtone for the incoming call to the SIP account chosen. The system ringtone is set by default.
Shared Call Appearance (SCA)
Shared Call Appearance (SCA): Enable or disable SCA on the account.
Enable Barge-in: If set to "Yes", the user could barge into an active call on a shared line.
Auto Fill Call Park Code: If set to "Yes", the configured "Call Park Service Code" will be automatically filled in on the
phone's dial pad when picking up the parked call. This is used when "Special Mode" is set to "BroadSoft" (from web UI or
provisioning) and "Enable SCA" is set to "Yes".
Call Park Service Code: Configure the retrieving feature code for call parking. If "Auto Fill Call Park Code" is set to "Yes",
this call park service code will be automatically filled in on the phone's dial pad when picking up the parked call. This is
used when "Special Mode" is set to "BroadSoft" (from web UI or provisioning) and "Enable SCA" is set to "Yes".
Seize Line Timeout (s): Configure the time for the line can be seized (in seconds) when using shared line. The default
setting is 15 seconds. For Shared Call Appearance, phone will send a SUBSCRIBE-request for the line-seize event package
whenever a user attempts to take the shared line off hook. "Line Seize Timeout" is the line-seize event expiration timer.
Bluetooth
Bluetooth: Tap on "Bluetooth" to turn on/off Bluetooth connection. By default, it's turned off.
Enable handsfree mode: Tap on "Enable handsfree mode" to activate it.
Show received files: Shows the Transfer history of Bluetooth files
Additional Settings: This menu is available only when the Bluetooth is enabled:
Device Name. Tap to change the name of the GXV3350, which is displayed on other Bluetooth devices when discovered.
By default, it's "GXV3350_XXXXXX" Where XXXXXX are the last 6 digits of the phone's MAC address.
Visibility timeout. Tap to select the timeout interval among "2 minutes", "5 minutes", "1 hour" or "never". By default, the
visibility timeout is 2 minutes.
Visibility to nearby Bluetooth devices. Sets the visibility of the phone to other Bluetooth devices. Normally this option is
enabled during pairing process so that other Bluetooth devices can discover the GXV3350.
Available devices: This section will show the available devices for pairing. Tap on
GXV3350 to discover the Bluetooth devices within the range.
Network
Users can configure Ethernet settings, Wi-Fi, VPN, PPPoE and other advanced network settings here.

Ethernet Settings

Data and VoIP use different networks: Configures whether to set up different networks for the phone data and the call.
If set to "Yes", you need to configure the data network and VoIP network respectively. Take effect after rebooting.
to initiate scan process on the