Grandstream Networks GHP6 Series Administration Manual page 55

HTTP/HTTPS Password
Always send HTTP Basic Authentication
Information
Config File Prefix
Config File Postfix
Authenticate Conf File
XML Config File Password
Configure Manually
Upload GUI Customization File
Configure via Network
GUI Customization File Download Mode
GUI Customization File URL
GUI Customization File HTTP/HTTPS
User Name
GUI Customization File HTTP/HTTPS
Password
Use Configurations of Config File Server
Automatic Upgrade
Automatic Upgrade
Configure the password for the config HTTP/HTTPS server.
Include configured user name and password in HTTP request before receiving
authentication challenge from the server.
Default is "No".
Check if configuration files are with matching prefix before downloading them.
This field enables user to store different configuration files in one directory on the
provisioning server.
Check if configuration files are with matching postfix before downloading them.
This field enables user to store different configuration files in one directory on the
provisioning server.
Sets the phone system to authenticate configuration file before applying it. When
set to "Yes", the configuration file must include value P1 with phone system's
administration password. If it is missed or does not match the password, the phone
system will not apply it.
The default setting is "No".
Decrypt XML configuration file when encrypted. The password used for
encrypting the XML configuration file is using OpenSSL.
GUI Customization File
Uploads the customization file to the phone
Note: To create the customized configuration file please access the Grandstream
GUI Config tool : http://tools.grandstream.com:8081/#/
Select the download method: TFTP, HTTP or HTTPS.
Default setting is "HTTPS".
Set IP address or domain name of the GUI customization file server. The server
hosts a copy of the file to be installed on the phone. The Default setting is
fm.grandstream.com/gs.
Enter the username for the firmware HTTP/HTTPS server.
Enter the password for the firmware HTTP/HTTPS server.
Retrieve and download customization file with the configuration of the config file.
Provision
Specify when the firmware upgrade process will be initiated; there are 4 options:
● No: The phone will only do upgrade once at boot up.
● Check every minute: User needs to specify "Automatic Upgrade Check
Interval(m)" and "Hour of the day (0-23)"
● Check every day: User needs to specify "Hour of the day (0-23)".