Network Settings/Wi-Fi Settings; Add Network - Grandstream Networks GHP6 Series Administration Manual

Layer 2 QoS
When Different Networks for Data and VoIP Calls set to Yes, then this option will be applied for
802.1Q/VLAN Tag
VoIP traffic. Assigns the VLAN Tag of the Layer 2 QoS packets for Ethernet for VoIP Calls. The Default
(Ethernet) for VoIP
value is 0.
Calls
802.1x Mode
Enables and selects the 802.1x mode for the phone system. The supported 802.1x modes are: EAP-
MD5, EAP-TLS, EAP-PEAP
802.1x mode
The default setting is "Disable".
Enters the identity information for the selected 802.1x mode. (This setting will be displayed only if
802.1x Identity
802.1 X mode is enabled).
Enters the secret for the 802.1x mode. This option will appear when 802.1x mode is EAP-MD5 or
802.1x Secret
EAP-PEAP.
Uploads the CA Certificate file to the phone. (This setting will be displayed only if the 802.1 X mode
CA Certificate
is enabled)
Loads the Client Certificate file to the phone. (This setting will be displayed only if the 802.1 X TLS
Client Certificate
mode is enabled)
Loads the private key file to the phone. (This setting will be displayed only if the 802.1 X TLS mode is
Private Key
enabled)

Network Settings/Wi-Fi Settings

Wi-Fi Basics
WiFi Function Enables/disables the Wi-Fi feature. The default setting is "Disable".
Configures the Wi-Fi frequency band from the list:
2.4G
WiFi Band 5G
2.4 G & 5G
Default setting is 2.4G & 5G.
Permits to scan and select the available Wi-Fi networks within the range if the Wi-Fi feature is enabled.
ESSID Click on "Select" to select the Wi-Fi network to connect to. The ESSID will be auto filled in the ESSID
filed.

Add Network

ESSID Configure the hidden ESSID name.
Security Mode
Defines the security mode used for the wireless network when the SSID is hidden. Default is "None".
for Hidden SSID
Password Determines the password for the selected Wi-Fi network.
Table 20: Network Settings/Ethernet Settings