Grandstream Networks GHP6 Series Administration Manual page 58

Selects the level of logging for syslog. The default setting is "None". There are 4 levels from the dropdown
list: DEBUG, INFO, WARNING and ERROR. The following information will be included in the syslog packet:
DEBUG (Sent or received SIP messages).
INFO (Product model/version on boot up, NAT related info, SIP message summary, Inbound and
Syslog Level
outbound calls, Registration status change, negotiated codec, Ethernet link up).
WARNING (SLIC chip exception).
ERROR (SLIC chip exception, Memory exception).
Note: Changing syslog level does not require a reboot to take effect.
Syslog
Only send the syslog with keyword, multiple keywords are separated by comma. Example: set the filter
Keyword
keyword to "SIP" to filter SIP log.
Filter
Logcat
f Clears the log files saved in the phone system.
Log Tag Configures the filter to display the specified process log file.
Selects the log priority to display. It can be selected from list below:
Verbose (Default Setting)
Debug
Info
Log Priority
Warning
Error
Fatal
Silent (suppress all output)
Get Log Displays the log file on the web page.
Debug
One-click
Debugging
Capture the checked info in the debugging list, click "Start" to debug if including "Capture trace" item and
One-click
click "Stop" to end, Click "Capture" in another situation. All retrieved files will be generated to a package,
Debugging
and the last package will be overwritten, while the trace file will stay remain.
Display a list of info items that can be debugged, currently supports system logs, info log, capture package,
Debug Info
tombstones and ANR log. The captured data can be viewed in "Debug information list". The default is all
Menu
selected.
Debug Info You can select the existing debugging info package or grab package. Click the "Delete" button on the right
List to delete the file.
You can select the existing debugging info package or grab package.
View Debug
Info
Click the "Delete" button on the right to delete the file.
Core Dump