Grandstream Networks GHP6 Series Administration Manual page 29

Auto Answer
Custom Alert-Info for Auto Answer
Play Warning Tone for Auto Answer
Intercom
Intercom Barging
Auto Preview
Send Anonymous
Intercept Anonymous Calls
Call Log
Enable Call Features
Enable Call Waiting
Mute on Answer Intercom Call
Transfer on 3-way Conference Hang
up
Use # as Dial Key
"Only display Remote Screen": GXV3350 only displays the remote screen in full screen mode.
"Default": GXV3350 will show both remote and local video feed.
Sets the phone system to allow to answer an incoming call automatically when idle. If it is set
to "Yes", the phone will automatically enable the speaker phone to answer all the incoming
calls after a short reminding beep. If set to "Enable Intercom/Paging", it will automatically
answer the incoming calls whose SIP INVITE includes auto-answer tag in the info header. The
default setting is "No".
Configures the Alert-Info content. Only when the info or the parameter in Alert-Info header
matches this content would the phone answer the paging call automatically. If set to blank, all
paging calls will be answered automatically.
When this option is enabled, the phone will play a warning tone When auto-answering
intercom. The default setting is "Yes".
Configures whether to answer the incoming intercom call when there is already an active call
on the phone. When" Intercom Barging" is enabled, and if the current active call is an intercom
call, the incoming intercom call will be automatically rejected; otherwise if the current active
call is not an intercom call, the current active call will be put on hold and the incoming
intercom will be automatically answered. When "Intercom Barging" is disabled, a prompt will
show up indicating the incoming intercom call without interrupting the current active call.
Default setting is disabled.
Configures whether to turn on video to preview the video of the caller. If set to "Yes", the user
can view the video and hear the caller on the incoming page when there is an incoming call.
if set to "Yes with Ringing", the caller can view the video of the caller and hear the ringtone on
the incoming page but cannot hear the caller.
Note: If Auto Answer function has been enabled, this function does not take effect. Default
Value: "No".
Sets the phone system to make an anonymous outgoing call. If set to "Yes", the "From" header
in the SIP INVITE messages will be set to anonymous, essentially blocking the Caller ID to be
displayed. Default is "No".
If set to "Yes", anonymous calls will be automatically blocked. The default setting is "No".
Categorizes the call logs saved for this account. If it is set to "Log All", all the call logs of this
account will be saved. If set to "Log Incoming/Outgoing Calls (Missed Calls Not Record)", the
whole call history will be saved other than missed call. If it is set to "Disable Call All", none of
the call history will be saved. If it is set to "Don't Prompt Missed Call", the phone will log the
missed call histories, but there is no prompt to indicate the missed calls on phone LCD. The
default setting is "Log All".
Configures the local start command feature. If it is set to "Yes", the feature will be enabled to
recognize the local star code command. Otherwise, it will be disabled. The default setting is
"No".
Configures the call waiting function for this account. If set to "Default", it will be configured
according to global call waiting function.
When enabled, phone will mute the incoming intercom call based on Call-Info/Alert Info
Headers. Default is disabled.
Transfers conference from hosted party when hang up, thus other parties can continue the
conference without interruption. Default is unchecked.
Treats "#" as the "Send" (or "Dial") key when set to "Yes". If set to "No", this "#" key can be
included as part of the dialed number. Please make sure the dial plan is properly configured to
allow dialing # out. Default is "Yes".