System Settings Page Definitions; System Settings/Time And Language - Grandstream Networks GHP6 Series Administration Manual

Network Settings/SNMP Settings
This page allows to enable/disable the SNMP feature. Default settings is "No". When enabled, the device is an SNMP agent
compiling and storing all the data from its given device into a database (MIB). This database is properly structured to allow
the Manager software to easily poll information and even send information to the Manager if an error has occurred.
Enable SNMP Configures whether to enable SNMP.
Version Selects SNMP version from the drop-down list.
Port Configures the port for SNMP.
Username Configures username for SNMPv3.
Security Level Selects security level for SNMPv3.
Trap Version Selects trap version of SNMP trap receiver.
Trap IP Version Configures IP address of SNMP trap receiver.
Trap Port Configures the port of SNMP trap receiver.
Trap Interval(m) Configures the interval between each trap sent to the trap receiver.
Trap Community Configures community name associated to the trap. It must match the community name of the trap receiver.

System Settings Page Definitions

System Settings/Time and Language

NTP Server
NTP Update Interval (m)
Allow DHCP Option 42 to
Override NTP Server
Allow DHCP Option 2 to
Override Time Zone
Setting
Enable Self-Defined Time
Zone.
Table 23: Network Settings/Advanced Network Settings
Table 24: SNMP Settings
Time Settings
Defines the URL or IP address of the NTP server. The phone may obtain the current date and time
information from the server. The default setting is "pool.ntp.org".
This allows the user to configure interval for updating time from the NTP server. Valid value is between 5
and 1440 minutes. If set to 0, it will follow the default update rules. Default value is 0.
Obtains NTP server address from a DHCP server using DHCP Option 42; it will override configured NTP
Server. If set to "No", the phone will use configured NTP server to synchronize time and date even if a NTP
server is provided by DHCP server.
The default setting is "Yes".
Obtains time zone setting (offset) from a DHCP server using DHCP Option 2; it will override selected time
zone.
If set to "No", the phone will use selected time zone even if provided by DHCP server. The default setting is
Yes.
Enable/Disable Custom Time Zones.