System Application/Contacts - Grandstream Networks GHP6 Series Administration Manual

Hide thumbs Also See for GHP6 Series:

User manual (52 pages)

Administration manual (43 pages)

Administration manual (42 pages)

Table Of Contents

Table of Contents

One Page Display

Configures whether to enable one page display mode. If set to "Yes", each extension board only shows 20

Mode

programmable keys, so keys 1-80 will be displayed on 4 extension boards.

Sync Backlight with

Configures whether to synchronize the backlight with LCD. If set to "Yes", the backlight will turn off when LCD is

LCD

in idle

EXT Sync Prompt

When accessing EXT, configures whether to pop up the EXT synchronization prompt.

Enable Active MPK

When enabled, GBX20 will auto swtich to the page that there are active MPKs. When unchecked, the user needs to

Page

press the GXB20 buttons to switch MPK pages. It is enabled by default.

Hide BLF Remove

Configures to hide the status information of the monitored line. When checked, BLF LED would not update

Status

whether they are in a call or have an incoming/outgoing call. It is disabled by default.

Account

Displays account name if configured, otherwise, displays "Account X" where X is the account number.

BLF Call-pickup

Configures the prefix prepended to the BLF extension if the phone answers a call to the monitored party by the

Prefix

BLF key. Default setting is ** for each account.

Determines the event list BLF URI on the phone to monitor the extensions in the list with MPK keys. This feature

is based on BroadSoft standard. It requires filling in the BLF ID to the box.

Eventlist BLF URI

For example, if the server provides the URI: BLF123@myserver.com, this field should be filled with BLF123.

Then the monitored extensions will be populated in the MPK app or Extension Board (if supported).

Force BLF Call-

Uses the prefix for BLF Call-pickup. The default setting is "No".

pickup by Prefix