Grandstream Networks GHP6 Series Administration Manual page 30

Use # as Redial Key
DND Call Feature On
DND Call Feature Off
No Key Entry Timeout (s)
Ring Timeout (s)
Refer-To Use Target Contact
RFC2543 Hold
Call Forward
Call Forward Type
Dial Plan
Dial Plan Prefix
Disable Dial Plan
Dial Plan
Allows users to configure the "#" key as the "Redial" key. If set to "Yes", the "#" key will
immediately redial the last call. In this case, this key is essentially equivalent to the "Redial"
key. If set to "No", the "#" key is treated as part of the dialed string.
Configures the feature code to enable the DND (Do Not Disturb) feature for this account. If it is
configured, the phone will dial the feature code automatically when the DND feature is
enabled.
Configures the feature code to disable the DND (Do Not Disturb) feature for this account.
If it is configured, the phone will dial the feature code automatically when the DND feature is
disabled.
Determines the expiration timer (in seconds) for no key entry. The dialed digit will be sent out
if no other digits entered within the set period. The default value is 4 seconds. The valid range
is from 1 to 15. This feature does not work if the dialer page is entered via the Account Widget
on the phone.
Defines the expiration timer (in seconds) for the rings with no answer. The default setting is 60.
The valid range is from 10 to 300.
Sets the phone system to use the target's Contact header tag to the Refer-To header in the SIP
REFER message during an attended transfer.
The default setting is "No".
If yes, c=0.0.0.0 will be used in INVITE SDP for hold.
Sets the Call Forwarding feature for this account.
None: Disable call forwarding feature.
Unconditional: Set to forward all calls to a specified account.
Time based: Set the call forwarding rule based on time. The system can forward incoming calls
to the accounts of In Time Forward to and Out Time Forward to.
Others: Set the call forwarding rule based on following account status.
Forward when Busy: the call will be forward to number set under "Busy To" when the account
is busy.
Forward when No Answer: The call will be forwarded to the number set under "No Answer To"
after the configured timeout. (range 1- 120s)
Forward when DND: When the phone is on DND mode the call will be forwarded to number
configured under "DND To".
Configures the digits prepended to the dialed number.
Enables/disables the Dial plan mechanism for different cases. If the specific case is checked,
the Dial plan mechanism will be disabled.
Dial Page: It controls the pattern of dialing numbers from the keypad, phone app and account
widget.
Contact: It controls the pattern of dialing numbers from local or LDAP.
Incoming call history: It controls the pattern of dialing numbers from inbound call logs.
Outgoing Call History: It controls the pattern of dialing numbers from outbound call logs.
MPK&Click2Dial: It controls the pattern of dialing numbers from MPK app and the link on the
webpage.
The default setting is unchecking all the cases.
Configures the dial plan to establish the expected number and pattern of digits for a telephone
number. This parameter configures the allowed dial-plan for the phone.
Dial Plan Rules:
1. Accepted Digits: 1,2,3,4,5,6,7,8,9,0 , *, #, A,a,B,b,C,c,D,d,+