Wp820 Web Gui Settings - Grandstream Networks WP820 Administration Manual

The password is case sensitive with maximum length of 25 characters.
Changing HTTP / HTTPS Web Access Port
1. Access the Web GUI of your WP820 using the admin's username and password. (Default username and password are:
admin/admin).
2. Press Login to access your settings.
3. Go to System Settings ��
4. In Web/SSH Access page, select the access method depending on desired protocol (HTTP or HTTPS)
5. Locate HTTP / HTTPS Web Port field and change it to your desired/new HTTP / HTTPS port.
Note: By default, the HTTP port is 80 and HTTPS is 443.
6. Press Save and Apply buttons to save your new settings.
Note
After modifying the connection method or port, the web GUI will be automatically logged out and redirected to the new address

WP820 WEB GUI SETTINGS

This section describes the options in the WP820 Web UI. As mentioned, you can log in as an administrator or an end user.
Status: Display account status, network status and system info.
Account: Configure accounts with general settings, SIP settings, codec settings, call settings and advanced settings.
Phone Settings: Configure general settings, call settings, ringtone, Video Settings, PTT/multicast paging and Wallpaper
setting.
Network Settings: Bluetooth, Wi-Fi settings, OpenVPN® settings and advanced network settings.
System Settings: Time/language settings, security settings, preferences settings and TR069 settings.
Maintenance: Configure upgrade and provisioning settings, system diagnosis and event notification settings.
Security Settings.
Figure 11: Web/SSH access