Table of Contents
Advertisement
Chapter 5 Backup
Configuring a Backup Job
You can configure backup jobs by using another shared folder on the Buffalo NAS device or a USB drive connected
to the TeraStation as a destination. You can also back up to a Buffalo NAS device on another network as long as the
two networks are connected by a VPN or the route is configured properly.
1
From Settings, click Backup.
2
Click
to the right of "Backup".
3
If you had configured a backup device access key for the backup source folder on another Buffalo NAS device
or the backup destination folder, click Set. If you hadn't, skip to step 5.
4
Enter the backup device access key and click OK.
95
Advertisement
Table of Contents
