Chapter 4 Storage Management
4
Select a volume to connect from the drop-down list of "Volume" and click Connect.
5
Click OK.
Formatting Volumes
If using the connected volume for the first time, the volume should be formatted to be used as a local drive. Follow
the procedure below for formatting.
1
From Windows, navigate to Control Panel > System and Security > Administrative Tools > Computer Management.
2
Click Disk Management.
When the "Initialize Disk" screen appears, click OK without changing any settings.
3
Right-click the drive volume that shows the status "Unallocated" and click New Simple Volume from the
displayed menu. Follow the screen to finish formatting.
When the formatting process is completed, the drive will be visible as an icon in Computer or My Computer and can
be used as a normal drive on the computer.
Disconnecting a Volume
1
Click Start > Programs > Buffalo > iSCSI Connection Tool > iSCSI Connection Tool.
iSCSI Connection Tool will open.
70