Table of Contents
Advertisement
Chapter 11 Utilities
Name
Open
Refresh
I'm here
Settings
Configure
Label Color
View Options
Auto Power Mode
To display these
options, hold down
the control key and
click your device's
icon.
The following menus may be accessed from the Buffalo NAS device's properties page.
Name
Configuration
IP Address
Open Folder
Settings
Configure
I'm here
Label Color
Description
Click Settings to open the configuration interface.
Select the "Use DHCP" checkbox to assign an IP address from the DHCP server
automatically. If there is no DHCP server on the network, you cannot use this
function. Select the "Renew IP address" checkbox to obtain an IP address from the
DHCP server. You can manually enter a static IP address, subnet mask, and default
gateway.
Description
Opens the Buffalo NAS device's shared folders.
Searches for the Buffalo NAS devices on the network again.
Causes your Buffalo NAS device to beep.
Opens Settings for the Buffalo NAS device.
Opens the properties page that lets you configure the
Buffalo NAS device's IP address or open Settings.
Selects the color of the name displayed below the icon.
Lets you choose the icon size, position, and view mode.
Auto power mode can turn supported Buffalo NAS devices
on the network on and off automatically.
Opens the Buffalo NAS device's shared folders.
Opens Settings for the Buffalo NAS device.
Opens the properties page that lets you configure the
Buffalo NAS device's IP address or open Settings.
Causes your Buffalo NAS device to beep.
Selects the color of the name displayed below the icon.
246
Advertisement
Table of Contents
