Table of Contents
Advertisement
Chapter 10 Advanced Features
5
Select the LAN port that will be used, select the port trunking mode, and click Accept.
6
Connect the hub's LAN port and TeraStation's LAN port using the second LAN cable. If you are using an
intelligent switch, connect to the LAN port that was previously configured for port trunking.
7
Restart the TeraStation before use.
Connecting a Printer
You can connect a printer to the USB port on the TeraStation.
Notes:
• Only one USB printer can be connected to the TeraStation.
• Bidirectional communication is not supported i.e., remaining ink quantities and other printer status information
are not displayed.
• If a multifunctional printer is connected, only the printer function can be used. Other functions such as scanning
will not be available.
• The print server does not support macOS.
• Don't disable the SMB protocol while the print server is enabled. If you do, you will need to enable SMB again and
reconfigure the print server from scratch.
1
From Settings, click Services.
2
Move the print server switch to the
3
Refer to the manual supplied with the printer and install the printer drivers.
position to enable the print server.
203
Advertisement
Table of Contents
