Table of Contents
Advertisement
Chapter 5 Backup
6
Select backup settings such as date and time to run. Refer to the differences between the backup modes in the
following
"Backup Modes"
7
Click Add.
Note: If you want to back up to a Buffalo NAS device on another network, follow the procedure below to add
the Buffalo NAS device on another network before selecting the backup folders.
a. Click LinkStation and TeraStation List.
b. Click Add under "Off-subnet Devices", enter the IP address or hostname of the destination Buffalo NAS
device, and click Refresh. Make sure that the desired Buffalo NAS device is added to the "Detected
LinkStations and TeraStations" list.
c. Click Close when completed.
8
Click Browse under "Backup Source Folder Name".
section.
97
Advertisement
Table of Contents
