Table of Contents
Advertisement
Chapter 4 Storage Management
3
Right-click the drive volume that shows the status "Unallocated" and click New Simple Volume from the
displayed menu. Follow the screen to finish formatting.
When the formatting process is completed, the drive will be visible as an icon in Computer or My Computer and can
be used as a normal drive on the computer.
Disconnecting a Volume
1
From Windows, navigate to Control Panel > System and Security > Administrative Tools > iSCSI Initiator.
The status of the connecting volume will be displayed as "Connected" under "Discovered targets".
2
Select a volume to disconnect and click Disconnect.
3
Click Yes.
4
When the volume status is displayed as "Inactive", the disconnection was carried out properly.
Using Buffalo iSCSI Connection Tool
Connecting a Volume
To connect a volume using Buffalo iSCSI Connection Tool from a Windows computer, follow the procedure below.
Note: This section uses the TS5400D as an example; the procedure below can be used with other TeraStation models
as well.
1
Click Start > Programs > Buffalo > iSCSI Connection Tool > iSCSI Connection Tool.
iSCSI Connection Tool will open.
68
Advertisement
Table of Contents
