Chapter 11 Utilities
Chapter 11 Utilities
NAS Navigator2 for Windows
NAS Navigator2 is a utility program that makes it easy to display Settings, change the Buffalo NAS device's IP
address, or check its drive. To install NAS Navigator2, download the installer from the d.buffalo website, accessible
from either
http://d.buffalo.jp/TS5000/
or http://d.buffalo.jp/TS5000N/.
NAS Navigator2 will run in the system tray when the computer is on.
Double-click the NAS Navigator2 icon (
) to start NAS Navigator2.
Click a Buffalo NAS device's icon to display total capacity, used space, workgroup name, IP address, subnet mask,
default gateway, MAC address, and firmware version.
Double-click the icon to open a shared folder on the Buffalo NAS device.
242