Chapter 10 Advanced Features
To use a different NTP server, clear the "Use Default NTP Server" checkbox and enter a new NTP IP address or
its hostname, then click OK. If an NTP server is specified by name instead of IP address, make sure that a DNS
server is configured for the TeraStation.
Note: The internal clocks of the TeraStation and other devices on your network may run at slightly different
speeds. Over a long period of time, your network devices may show somewhat different times, which can
cause network problems. If clocks on your network vary by more than five minutes it may cause unexpected
behavior. For best results, keep all clocks on the network set to the same time by adjusting them regularly, or
use an NTP server to correct them all automatically.
6
Click the Language tab. Select the language to be used and click OK.
Note: This tab changes the language used by the TeraStation for email notifications, antivirus software, DLNA,
and other functions. To change the language displayed in Settings, go to Settings and click Language from the
menu bar. Choose your desired language from the drop-down list.
Beep Alerts
You can set the TeraStation to beep if certain errors occur.
1
From Settings, click Management.
2
Click
to the right of "Notifications".
3
Click Edit.
4
Click the Alert Sound Settings tab.
231