Table of Contents
Advertisement
Chapter 10 Advanced Features
4
Select whether to use SNMP version 2 or version 3.
5
Configure the desired settings, then click OK.
6
Move the SNMP switch to the
7
SNMP has been configured for the TeraStation. For further use, configure your SNMP-compatible network
management software using the Buffalo-specific MIB (management information base) file. The MIB file is
available from the
Buffalo
Depending on which SNMP client software you use, the procedure for configuring the software will differ. For
more detailed information on configuring the client software, refer to its help or included manual.
Saving and Applying Settings
The TeraStation's settings can be saved to a USB drive and restored to another TeraStation of the same series. Use
this feature to back up and copy settings to a new TeraStation.
position to enable SNMP.
website.
218
Advertisement
Table of Contents
