Table of Contents
Advertisement
Chapter 6 Remote Access and Cloud Services
2
Click
to the right of "WebAccess Remote".
3
Click Edit.
4
Click Browse next to the "Target Folder" field and select the shared folder that will be connected.
5
You may choose to enter a BuffaloNAS.com name or an external DNS/IP address. If using a BuffaloNAS.com
name, it should be the same BuffaloNAS.com name assigned to the remote NAS device. If using an external
DNS/IP address, enter either the IP address of your DNS server or the global IP address of the remote NAS
device's WebAccess.
6
Enter the remote NAS device's admin username and password.
7
Click OK.
8
Move the WebAccess Remote switch to the
9
You can directly access the shared folder in the remote NAS device by entering the path displayed at the
"Target Folder" field into the address bar in File Explorer or another file manager program.
Notes:
• The selected target folder is used internally by WebAccess Remote. Files are not added to this folder and the
amount of used space does not increase.
• If using after the network has been temporarily disconnected, click Remount.
position to enable WebAccess Remote.
124
Advertisement
Table of Contents
