Table of Contents
Advertisement
Chapter 2 Configuration
Chapter 2 Configuration
Configure and manage your TeraStation using the Settings interface, accessible from a browser window. Open the
interface using the procedure below or type the TeraStation's IP address into the URL field of your browser. Within
Settings, the Easy Admin page gives you quick access to commonly-used settings.
Note: Microsoft Edge, Firefox, Google Chrome, Internet Explorer 9 or later, and Safari 9 or later are supported. If you
have difficulty viewing Settings, check the following:
• If there are a large number of registered users, groups, or shared folders, use another browser instead of Internet
Explorer.
• If you have a proxy server enabled in the browser settings, configure the exception settings for Settings or disable
the proxy server.
• With Internet Explorer, set security to Local intranet. On Windows Server operating systems, higher-level security
is configured by default. Set the security to a lower level temporarily.
Opening Advanced Settings
Note: This section uses the TS5400D as an example; the procedure below can be used with other TeraStation models
as well.
1
Double-click the NAS Navigator2 icon (
2
Right-click your TeraStation's icon and select Settings. For macOS, select the TeraStation's icon while holding
down the control key, then select Settings.
) to start NAS Navigator2.
20
Advertisement
Table of Contents
