Buffalo TeraStation 5000, TS5400R - Network Storage Quick Setup Guide

Installation

1. Connect the TeraStation's Ethernet and power cables and turn it on.
   
   The socket-outlet shall be installed near the equipment and shall be easily accessible.
2. Launch TeraNavigator from the software CD in your TeraStation package. Or, download and run the TeraNavigator software from http://d.buffalo.jp/TS5400R/.
   
3. Click Begin Installation. The wizard will guide you through installing NAS Navigator2.
   
4. Open NAS Navigator2. Right-click on the TeraStation's icon in NAS Navigator2 and select Properties. Set the TeraStation's IP address. Then, log in to Settings (as described below) and set the TeraStation's clock.

For more information, refer to the TeraStation's user manual, available from the link in TeraNavigator or from http://d.buffalo.jp/TS5400R/. Your computer must be connected to the Internet to access or download the user manual.

Opening Settings (for more options)

1. After installing NAS Navigator2, your PC will have a NAS Navigator2 icon on the desktop. On a Mac, it will appear in the Dock.
2. Double-click on the icon to open NAS Navigator2, the TeraStation's client utility. Right-click on the TeraStation's icon in NAS Navigator2 and select Settings. Settings will open.
3. Enter the administrator username and password, then click OK to log in to Settings. We recommend that you change the administrator password. Until it is changed, the default username is "admin" and the password is "password".