Canon ImageRUNNER 1022iF Service Manual page 59

9) Using the two supplied TP screws (M4x16) [1], attach the card reader to the reader.
10) Route the repeating harness B [2] in the hole [3] of the right cover.
When tightening the screws, take care not to damage the repeating harness A.
11) Slide the card reader cover [1] to attach it to the card reader mount.
Route the repeating wire A [1] as shown below.
[1]
F-2-15
[1]
[2]
[3]
F-2-16
[1]
F-2-17
Chapter 2
2-9