Table of Contents
Advertisement
When reinstalling the pickup/feed roller unit, care should be taken to the fol-
lowing:
1. The arms [4] must be behind the shutters [1].
2. The arms [4] must be behind the ribs [5].
10.4.7 Pickup Roller
10.4.7.1 Removing the Pickup Roller
/ / / / iR1018 / iR1018J / / iR1022A / iR1022F / iR1022i / iR1022iF /
1) Remove the pickup/feed roller unit.
2) Remove the screw [1], and then remove the roller bracket [2].
3) Remove the pickup roller [3].
[2]
F-10-27
10.4.8 Original Separation Pad
10.4.8.1 Removing the Separation Pad
/ / / / iR1018 / iR1018J / / iR1022A / iR1022F / iR1022i / iR1022iF /
1) Open the open/close cover.
2) Release the two claws [1], and then remove the separation pad [2].
[1]
F-10-28
When reinstalling the separation pad, be sure to put the spring [2] in the
groove [1].
[2]
F-10-29
[3]
[1]
[2]
[1]
[1]
0013-1251
0013-1256
Chapter 10
10-11
Advertisement
Table of Contents
