Table of Contents
Advertisement
Safety Precautions
•
Remove all rings, watches, and jewelry when operating machine. Do not wear loose
fitting clothing or long hair unrestrained which may become caught or entangled in
equipment.
•
Persons under the influence of drugs or alcohol or who are subject to seizures,
dizziness or loss of physical control must not operate this machine.
•
Hydraulic cylinders are subject to thermal expansion and contraction. This may result
in changes to the platform position while the machine is stationary. Factors affecting
thermal movement can include the length of time the machine will remain
stationary, hydraulic oil temperature, ambient air temperature, and platform
position.
1.3.2
Trip and Fall Hazards
•
Prior to operation, ensure all gates and rails are fastened and secured in their proper
position.
•
JLG Industries, Inc. recommends that all persons in the platform wear a full body
harness with a lanyard attached to an authorized lanyard anchorage point while
operating this machine. For further information regarding fall protection
requirements on JLG products, contact JLG Industries, Inc.
•
Identify the designated lanyard anchorage point (s) at the platform and securely
attach the lanyard. Attach only one (1) lanyard per lanyard anchorage point.
•
Enter and exit only through gate area. Use extreme caution when entering or leaving
platform. Ensure that the platform assembly is fully lowered. Face the machine when
entering or leaving the platform. Always maintain "three point contact" with the
machine, using two hands and one foot or two feet and one hand at all times during
entry and exit.
•
Keep both feet firmly positioned on the platform floor at all times. Never position
ladders, boxes, steps, planks, or similar items on unit to provide additional reach for
any purpose.
16
31221544
RT3394, RT4394
Advertisement
Table of Contents
