Table of Contents
Advertisement
4.1
GENERAL
This section explains the steps to be taken in case of an emergency situation during
operation.
4.2
INCIDENT NOTIFICATION
JLG Industries, Inc. must be notified immediately of any incident involving a JLG
product. Even if no injury or property damage is evident, JLG must be contacted by
telephone and provided with all necessary details.
•
USA: 877-JLG-SAFE (554-7233)
•
EUROPE: (32) 0 89 84 82 20
•
AUSTRALIA: (61) 2 65 811111
•
E-mail: productsafety@jlg.com
Failure to notify the manufacturer of an incident involving a JLG Industries product
within 48 hours of such an occurrence may void any warranty consideration on that
particular machine.
Following any incident, thoroughly inspect the machine. Do not elevate the
platform until it is certain that all damage has been repaired and that all controls
are operating correctly. Test all functions first from the ground control station then
from the platform control console.
4.3
EMERGENCY TOWING PROCEDURES
Towing this machine is prohibited, unless properly equipped. However, provisions have
been incorporated to move the machine in case of a malfunction or power failure. The
following procedures are to be used ONLY for emergency movement to a suitable
maintenance area.
1. Ensure the machine is in the stowed position. Chock wheels securely.
2. Disengage drive hubs by reversing disconnect caps.
3. Connect suitable equipment, remove chocks, and move machine.
RT3394, RT4394
SECTION 4
Emergency Procedures
NOTICE
31221544
69
Advertisement
Table of Contents
