Scissor Arm Safety Prop - JLG RT3394 Operation & Safety Manual

General Specifications and Operator Maintenance
Key
Hydraulic Oil -
HO
See Section — Operator Maintenance
Operating Temperature Specifications, page 98
Machine operation using non-JLG approved hydraulic fluids or operation outside of
the temperature boundaries outlined in the "Hydraulic Fluid Operating
Temperature Chart" may result in premature wear or damage to components of the
hydraulic system.
Figure 18. Hydraulic Fluid Operating Temperature Chart
6.6

SCISSOR ARM SAFETY PROP

The safety prop must be used whenever maintenance performed on the machine
requires the scissor arms to be raised.
1. To engage the safety prop, raise the unloaded platform high enough to allow the
safety prop to rotate vertically into position.
2. Rotate the rod keeper plate and release the safety prop actuator rod at the front
of the machine.
98
Specifications
- sub-section, Hydraulic Oil Tank and:
NOTICE
CAUTION
31221544
refer — Hydraulic Oil,
RT3394, RT4394