JLG RT3394 Operation & Safety Manual page 44

Machine Controls, Indicators, and Operation
9. System Fault Indicator
10. Leveling Jacks Button/LED Indicators
3.7.1 Platform Controls
Control boxes should not be switched from one machine to another.
Control Indicators - Diesel - Appears on machines equipped with diesel engines.
Control Indicators - Dual Fuel - Appears on machines with a dual fuel option.
Drive Speed Switch - With the platform lowered, the three position drive speed switch
permits the operator to select either high speed (3.5 mph - 5.6 kph), mid speed (2.0 mph -
3.21 kph), or low speed (1.0 mph - 1.61 kph). All three drive speeds use high engine speed.
When platform is elevated above high drive cutout height, drive speed is reduced to (0.5
mph) regardless of Drive Speed Switch setting.
Do not use high range when driving in close quarters or when driving in reverse.
Note: High/mid/low drive speeds are disabled when the platform is raised above the
high drive cutout height (refer to
ration, and
height, high/ mid/low drive speeds are enabled.
Do not operate machine if high drive speed operates when platform is raised above
the high drive cutout height.
Emergency Stop Switch - A two-position, red, mushroom-shaped emergency stop switch
functions to provide power to the platform control station and also to turn off power to the
platform function controls in the event of an emergency. With the power select switch
positioned to platform, power is turned on by pulling the switch out (on), and is turned off by
pushing the switch in (off ).
44
NOTICE
CAUTION
Inspection). When platform is lowered below high drive cutout
CAUTION
31221544
19. Three-Position Drive/Lift/Level Select Switch
Section — User Responsibilities, Machine Prepa-
RT3394, RT4394