JLG RT3394 Operation & Safety Manual page 56

Machine Controls, Indicators, and Operation
Note: When returning platform side rails to upright position on platforms equipped
with extensions, ensure the extension platform rail guide is interlocked over the
main platform rail once both rails are completely upright.
After the rails have been folded down, use extreme caution when exiting and
entering the platform. Enter and exit platform only at the gate area and ladder
provided.
If driving machine with the platform control station from ground, do not hang the
control box on any part of the machine while driving. Hold the control box and
keep at least 3 ft (1 m) distance from machine.
Figure 8. Platform End Rails - Fold Down Sequence and Rail Pin Locations
56
WARNING
WARNING
31221544 RT3394, RT4394