Parking And Stowing; Towing - JLG RT3394 Operation & Safety Manual

Figure 9. Platform Side Rails - Fold Down Sequence and Rail Pin Locations

3.16 PARKING AND STOWING

Park and stow the machine as follows:
1. Drive the machine to a reasonably well-protected and well ventilated area.
2. Ensure the platform is fully lowered.
3. Position the emergency stop switch to the off position.
4. If necessary, cover the instruction placards, caution and warning decals so that
they will be protected from hostile environment.
5. Chock at least two wheels when parking the machine for an extended period of
time.
6. Turn the platform/off/ground control select switch to off and remove the key to
disable the machine and prevent unauthorized use.

3.17 TOWING

It is not recommended that this machine be towed, except in the event of an
emergency such as a machine malfunction or a total machine power failure. Refer to
Section — Emergency Procedures
RT3394, RT4394
Machine Controls, Indicators, and Operation
for emergency towing procedures.
31221544
57