JLG RT3394 Operation & Safety Manual page 32

User Responsibilities, Machine Preparation, and Inspection
1. From the Ground Control Panel with no load in platform:
a. Check that all guards protecting switches are in place.
b. Operate all functions (refer to
Controls and Indicators).
c. Ensure that all machine functions are disabled when the Emergency Stop
Button is activated.
d. Check that auxiliary descent, lift down operates with engine off and power
on.
2. From the Platform Control Console:
a. Ensure that the control console is firmly secured in the proper location.
b. Ensure all guards protecting switches are in place.
c. Operate all functions and check all limiting and cutout switches (refer to
Table — Tilt Cutout Settings, page 33
Height, page 33
d. Ensure that all machine functions are disabled when the Emergency Stop
Button is activated.
e. Ensure all machine functions stop when function control is released or when
joystick trigger is released.
f. Check that manual descent (lift down) operates with engine off and power
on.
32
Section — Ground Control Station
for limit and cutout settings).
31221544
and Table — Maximum Drive Cutout
for Ground
RT3394, RT4394