Nespresso Momento 120 Service Manual page 138

138
Repair > Coffee Module Repairs
4. Release the flat receptacle of the ground wire at the thermoblock (1, location
circled in red).
This kind of flat receptacle has a special connector latching.
Press down the lever with flat nose pliers while pulling on it.
5. Unplug 2 connectors (see detail) from the main PCB (2):
(a) MHBU connector
(b) MHBU power connector
6. Pull the wires out of guides and wire saddles.
Momento 120 Service Manual
1
2
Fig. 102
Version 1.4 EN