Detach Hydraulic Unit And Pcb Assembly - Nespresso Momento 120 Service Manual

182
Repair > Milk Module Repairs (Metal Component Support)

11.14.2 Detach Hydraulic Unit and PCB Assembly

1
2
take special care to not push or bend any of the copper pipes around the
compressor of the fridge!
Prerequisites
• Tubes and electrical connectors from the RF-box are unplugged on the hydraulic
unit → p. 179.
Procedure
1. Unplug the electrical connector from the fridge fan (5) on the hydraulic unit (3).
2. Pull out the tube from the Y-connector (1, see detail).
3. Pull out the tube from the outlet valve (4, see detail).
4. Pull out the drain outlet (2, see detail) by hand.
5. Loosen 2 screws (crosshead) from the hydraulic unit (3).
Momento 120 Service Manual
3
4
5
Fig. 152
Version 1.4 EN