Replace Boiler - Nespresso Momento 120 Service Manual

11.13.12 Replace Boiler

This component and connected pipes are under pressure (→ p. 15),
follow the instructions on page 140 in advance!
Prerequisites
• Hydraulic unit and PCB assembly are detached → p. 160.
• Hydraulic components support is removed → p. 172.
Procedure
1. Remove the following electrical connectors from the boiler (1):
(a) Level detector (light grey)
(b) Boiler heating (brown)
(c) Boiler heating (blue)
(d) 2 grounding wires (black (top), green-yellow (bottom))
2. Remove the FEP tube (A) from the top of the boiler (1).
Version 1.4 EN
Repair > Milk Module Repairs (Plastic Component Support)
Momento 120 Service Manual
Removing FEP
tubes: → p. 142
Fig. 145
175