Replace Flowmeter - Nespresso Momento 120 Service Manual

11.11.8 Replace Flowmeter

1. Unplug the flowmeter connector (1).
2. Pull off the low pressure hoses (3,4) coming from the pump and the coffee mod-
ule coupling.
3. Insert the blade of a small flathead screwdriver below the flowmeter (2) and
release its locking pin.
Assembly tips
• Be cautious to not interchange the pressure hoses (3,4) – risk of malfunction.
• Make sure the connector (1) is plugged correctly on all 3 pins.
Version 1.4 EN
Repair > Coffee Module Repairs
1 2 3 4
Momento 120 Service Manual
Fig. 86
127