194
Repair > Milk Module Repairs (Metal Component Support)
2
3. Loosen 1 screw (crosshead) on the holding plate (2).
4. Remove the tube (3) coming from the water pump (5).
5. Remove the emptying valve (4) from the boiler (1) in the same way as FEP tubes.
6. Disconnect the boiler NTC connector (e).
7. Pull/push the boiler (1) out of the holding plate (2).
Momento 120 Service Manual
1
3
5
4
e
Fig. 166
Version 1.4 EN