If the machine is
reset to factory
settings, all customised
settings will be lost!
38
MMI Menus > Setup Menu
6.3.7 Set Water Hardness
1. Prepare the items as instructed.
After 1 minute in water, the test strip
is coloured.
3. Adjust the bottom ring on the
water filter to "A", "B" or "C" as
recommended.
6.3.8 Reset to Factory Settings
reset to factory se ings
you will reset the
machine to its factory
se ings
1. Select "yes" to reset the machine to
its factory settings. To cancel, select
"no" or tap on the "cancel" symbol.
Momento 120 Service Manual
water filter installation
a er 1 minute select the
colour of your test strip
2. Tap on the "A", "B" or "C" symbol
to match the colour of your test
strip. Tap on the "next" symbol to
proceed.
yes
no
Version 1.4 EN