Nespresso Momento 120 Service Manual page 162

162
Repair > Milk Module Repairs (Plastic Component Support)
8. Loosen 1 screw (crosshead) on the PCB assembly (1).
9. Release the latch (see detail) on each side of the PCB assembly (1) by hand.
10. Slide out the PCB assembly (1).
11. Unplug the connectors to the compressor (2), reed sensor (3) and the ground
wires (1).
12. The hydraulic unit and PCB assembly can now be separated from the fridge
assembly.
Momento 120 Service Manual
1
Fig. 130
Fig. 131
Version 1.4 EN